Long Range Rifle Side Matches
Long Nine Long Range Rife Side Match Schedule for 2013
Sunday July 21, 2013
Special Rifle-Only Match
Time: Register 8 AM; Shoot 9 AM
Cost: $10 per entrant
Lunch: Not provided-BYOL
–>>Download Information Sheet
Rifles: Pistol caliber – usual Cowboy calibers, iron sights (open or Peep), lever or single-shot
Rifle caliber - usual calibers (45-70, 45-90, 45-110, 38-55, 30-30), iron or peep sights
Lever or single-shot
Four total stages – two pistol caliber rifle stages, two rifle caliber rifle stages
Pistol caliber-20 to 100 yards
Rifle caliber-100, 200 yards
Each stage-5 minutes per shooter for ten shots
Top five pistol caliber
Top five rifle caliber
Top NINE, combined score
Match Director is Don Jorge
LONG NINE LONG RANGE RIFLE SHOOTING
Long range rifle shoots at the Long Nine range are held occasionally before the monthly matches beginning at 8:30 a.m. and ending a few minutes before the main match safety meeting.
Initially, shooting will be split into Rifle caliber at 100 and 200 yards, and Pistol (main match rifle) caliber at 50 and 100 yards with awards for each category, announced at the annual banquet. Statistics will be taken and if there are enough entrants in any of the SASS categories there will be a separate award for that category.
Equipment should follow the SASS rules, copied from the handbook below.
LONG RANGE (OR PRECISION) RIFLE
SASS long range or precision rifle competition is different than main match rifle competition with more emphasis placed on precision shooting at longer ranges, with time being a secondary scoring factor. Scoring for these matches is determined by the number of hits, with either of two methods used to break ties. At the match director’s option, either total time used to shoot the required number of shots or a shoot-off may be used to break ties.
There are five categories in long range or precision rifle competition, plus one optional category:
- Lever action, revolver caliber
- Lever action, rifle caliber
- Single Shot
- Buffalo Single Shot
- Open Category (may be used at the match director’s option to include those firearms not covered by other official Long Range Categories).
Blackpowder categories can be added to any or all of the basic categories at the option of the match director. Each category competes within itself.
BASIC EQUIPMENT RULES FOR THE LONG RANGE COMPETITIONS
• Front barrel sights may vary from simple blades to period hooded wind gauge designs using interchangeable sight inserts and having a spirit level mounted integral with the sight or sight base.
• Rear sights must either be open iron sights mounted on the barrel or original style tang or stock wrist mounted peep sights. Long range rear barrel mounted sights of the flip-up ladder type may use a peephole drilled through the sliding sight leaf. An example of this is the various ladder type sights used on the Springfield trapdoors.
• Optical and receiver mounted sights are not allowed.
• “Rifle Caliber” competition rifles must use traditional, period, rimmed cartridges. No cartridge chambered for use in any SASS approved main match revolver or rifle may be used in the “Rifle Caliber” competition, except the .56-50. Thus, .30-30 (.30 WCF), .38-55 Marlin & Ballard, .43 Spanish, or .45-70 Government cartridges are legal, while a .375 Winchester, .444 Marlin, .32-20, or .44-40 are not legal.
• Any propellant powder may be used (with the exception smokeless powder is not allowed in the Buffalo Single Shot competition).
• Regardless of category or caliber, bullets used in long range and precision rifle matches must be made of pure lead or lead alloy having a plain base, gas checked, or paper patched configuration.
Lever Action Rifles used in long range matches, whether revolver or rifle calibers, must be originals or replicas of rifles manufactured during the period from approximately 1860 until 1899. Lever or slide action, tubular feed, exposed hammer rifles or carbines are allowed, providing they are in safe working condition.
Single Shot and Buffalo Single Shot firearms must be originals or replicas of single shot rifles manufactured during the period from approximately 1860 until 1899. All rifles MUST have exposed hammers. The caliber and cartridge rules for the “Rifle Caliber” firearms noted above under basic rules also apply to Single Shot and Buffalo Single Shot rifles with the exception Buffalo Single Shot rifles must be .375″ bore size or larger.
Buffalo Single Shot competition has further restrictions requiring original or replica rifles to be a design of US manufacture. Spring-loaded ejectors are also prohibited, except for Springfield Trapdoor Rifles.
The Optical Category firearms must meet the above restrictions with the following optical rules:
- No length or power limitation on the scope.
- Scope tube body to be ¾” or less in diameter and any ocular or objective lenses and adjusting or assembly rings to be less than 1″ in diameter.
- No internal scope adjustments for windage or elevation.
- Mounts are to be of a traditional style of the period and contain the windage and elevation adjustments for the scope in either, or both, the front or rear mounts. No click adjustments in the mount. Either dove tail mounting or scope block mounting is allowed.
- Original scope mounts of either the Cataract or Malcom style or variations thereof or replicas or derivative scope mounts conform to the criteria of paragraph above.
- (Note: These rules are identical to the NRA BPCS Rules on optical sights.)